← Back to jobs

Machine Maintenance Technician

Mach IndustriesHuntington Beach, California, United States

Apply on employer site ↗

Opens employer site; does not submit an application.

Official posting fact summary

About Mach Industries

  • The posting describes a defense technology company founded in 2023, with approximately 350 employees, developing autonomous defense platforms for the United States and its allies.

The Role

  • Maintain and repair CNC machines and related manufacturing equipment, keeping them safe and reliable for development and production.
  • Use mechanical and electrical troubleshooting to manage machine-shop maintenance independently: set maintenance schedules, diagnose alarms and alignment problems, repair equipment, arrange specialist manufacturer service when required, and work with Manufacturing Engineering, Production and Quality to reduce recurring failures and downtime.

Key Responsibilities

  • Plan and carry out preventive maintenance for CNC mills, lathes, multi-axis machining centers and other shop equipment, using manufacturer guidance, utilization and operating conditions.
  • Systematically troubleshoot CNC alarms, tool-change faults, spindle and axis-positioning problems, and mechanical or electrical failures using machine diagnostics and service documentation.
  • Diagnose tool-changer, turret and spindle alignment problems; perform manufacturer-approved adjustments and recovery, escalating complex repairs when necessary.
  • Inspect, service and repair lubrication, coolant, hydraulic, pneumatic, filtration and chip-handling systems, including pumps, sensors, hoses, valves and connections.
  • Investigate abnormal sound, vibration, temperature, leaks and recurring alarms; correct underlying faults rather than relying on repeat resets or temporary fixes.
  • Coordinate manufacturer and third-party service, communicate fault history and diagnostic results, follow repairs through and confirm the completed work.
  • After maintenance, repairs or suspected collisions, check machine function; verify alignment, accuracy and production readiness with Manufacturing Engineering and Quality.
  • Keep equipment registers, maintenance calendars, service histories and critical spare-parts inventories; use downtime and repeat-fault records to prioritize reliability work.
  • Support new-equipment installation and commissioning, maintenance plans and documentation, coordinating with Facilities and equipment suppliers.
  • Train operators in routine checks, machine care and warning signs. Follow established lockout/tagout, electrical-safety and manufacturer servicing procedures.

Required Qualifications

  • Required: 4+ years of hands-on CNC machine-tool maintenance, troubleshooting and repair, through in-house maintenance, machine-tool field service or a comparable role.
  • Required experience diagnosing mechanical, electrical, hydraulic and pneumatic faults on CNC mills, lathes or multi-axis equipment.
  • Required practical troubleshooting experience with automatic tool changers, spindle systems, turret indexing, machine alignment and common CNC alarms.
  • Required ability to read electrical schematics, mechanical drawings, service manuals and machine diagnostic information.
  • Required proficiency with precision and diagnostic tools appropriate to the task, including dial indicators, test bars and electrical instruments.
  • Required ability to organize preventive work independently, prioritize breakdowns, document repairs and communicate equipment status and recovery plans.
  • Required knowledge of safe machine servicing, hazardous-energy isolation and the limits of tasks needing specialized training or manufacturer support.
  • Required: a high school diploma or equivalent.

Preferred Qualifications

  • Preferred experience servicing DMG MORI, Okuma, Brother, Haas or comparable CNC equipment, especially five-axis mills and mill-turn machines.
  • Preferred familiarity with Siemens, FANUC or Okuma OSP controls, alarm histories, input/output diagnostics and basic PLC troubleshooting.
  • Preferred experience checking spindle runout, tool retention, machine geometry and alignment after maintenance or an incident.
  • Preferred experience developing preventive-maintenance programs or using CMMS to manage assets, work orders, service histories and spare parts.
  • Preferred maintenance experience with lasers, waterjets, automation or other manufacturing equipment beyond CNC machines.
  • Preferred: technical training, an apprenticeship or manufacturer service certifications in industrial maintenance, mechatronics or machine-tool repair.

Additional Requirements

  • Availability for extended hours and weekends is required when needed.

ITAR Requirements

  • The announcement says applicants must be a U.S. citizen or national, a U.S. lawful permanent resident, a refugee under 8 U.S.C. § 1157, or an asylee under 8 U.S.C. § 1158, OR be eligible to obtain the required U.S. Department of State authorizations. This is not stated as a U.S.-citizens-only role.

Pay Range

  • The source lists $38–$48 USD. The pay period is not stated; this is not labeled as an hourly or annual amount.

Key Elements of Our Compensation Philosophy

  • The company describes performance-based bonuses tied to BOTH individual and company performance; this is general compensation policy, not a guaranteed award for this job.
  • The company describes stock options or equity for employees; the posting does not state an unconditional allocation for this position.
  • The company describes healthcare, dental and vision plans, retirement savings and paid time off; amounts, eligibility and job-specific terms are not given.
  • The company says it funds continuing education, training and career development; the posting does not give a job-specific allowance.

Disclosures

  • The job MAY require access to EAR- or ITAR-controlled information. An offer MAY depend on authorization to receive controlled software or technology WITHOUT sponsorship for an export license. This statement concerns export-license sponsorship; it does not establish a general immigration sponsorship policy.
  • The employer states that it participates in E-Verify and will send Form I-9 information to the federal government to confirm U.S. work authorization.
  • The listed range is an estimate of base salary only. Offers MAY vary with experience, education and training, critical skills and business considerations. Equity grants are included in MOST offers, not all; health insurance, retirement plans and professional development are described as company benefits.

Official application questions

  • The employer form requires a resume/CV; a cover letter is optional. Submit these directly to Mach.
  • A LinkedIn profile or website is optional. You may also describe an accomplishment or add information not shown on your LinkedIn profile or resume in optional fields.
  • The required undergraduate GPA question uses a 4.0 scale. If you do not have or do not remember that GPA, the form offers Not applicable/Do not recall. This question does not establish a degree requirement or a minimum GPA.
  • The SAT-score question requires an answer and offers Did not take/Do not recall. The question does not establish a minimum SAT score.
  • The ACT-score question requires an answer and offers Did not take/Do not recall. The question does not establish a minimum ACT score.
  • The required clearance question lists Top Secret SCI with Polygraph, Top Secret SCI/SAP, Top Secret, DOE Level Q, Secret, Expired Clearance, Never held a clearance or Do not wish to disclose. A required answer does not by itself establish a clearance requirement.
  • The official form requires a Yes or No answer about legal authorization to work in the United States.
  • The required citizenship-status question describes an ITAR condition: a US citizen, lawful permanent resident, protected individual under 8 USC 1324b(a)(3), or someone eligible for the necessary State Department authorizations. Response choices include US citizen or national, lawful permanent resident, refugee under 8 USC 1157, asylee under 8 USC 1158, DACA work authorization, or Other with an explanation. The DACA answer option alone does not establish satisfaction of that export-control condition.

Official application notices

  • The employer form marks the candidate Location response as required; this input is not a different job location.
  • Veteran-status self-identification is optional; the form offers a choice not to answer, as well as protected-veteran or not-protected-veteran responses.
  • Voluntary self-identification for government reporting is optional. Choosing whether to respond will not be considered in hiring or afterward; provided information is maintained in a confidential file.
  • The U.S. standard demographic questions are optional. If you choose to complete that survey, Mach says the responses may help identify improvements to its hiring process.

Education history on the official form

  • The official API marks the education-history module as required. On the official form, School and Degree are marked required; Discipline is not marked required. These required form entries do not establish a university-degree prerequisite.

Facts paraphrased from this job’s own official announcement. Content synchronized: . Last full-body read: . Check the official posting for complete terms.

Employer posting date: . This is separate from MillRole’s verification time.

Official source: View employer posting ↗ · Last checked:

Check time is not publication date. Read the complete official posting before applying.

Read all frequently asked questions →

MillRole is an independent platform, not affiliated with the hiring organizations. Applications stay on official employer sites. Inclusion does not imply employer approval or partnership.